Carpenter's Vise Clamp 150mm

150 mm carpentry vise designed to be installed under the workbench so that the jaws flush with the surface of the worktop. It provides secure fastening of smaller wooden elements during work such as machining, drilling or gluing. Steel guide rods ensure smooth and parallel movement of the jaws, and the retaining holes allow the installation of wooden pads to protect the workpiece. Practical, under-counter carpentry clamp for everyday work in the workshop.

Dimensions:
- Jaw width: 150 mm

Features:
- Under-counter mounting: design adapted for under-table mounting, with the jaws facing to the table surface.
- Converging jaw arrangement: uniform pressure distribution over the entire depth of the fastened component.
- Smooth, parallel travel: Guidance on steel bars reduces play and facilitates precise pressure.
- Adjustable ratchet: Works with stops mounted in the countertop for quick positioning of the workpiece.
- Retaining holes: possibility of mounting wooden inserts-jaws to protect the surface of workpieces.
- Compact design: Conveniently attach smaller components without taking up countertop space.
- Workshop compatibility: a solution typical of carpentry vises – easy to integrate into most carpentry tables.

Parameters:

- Jaw width: 150 mm
- Weight: 3,475 kg
- Unit of measurement: pcs
- Type: under-counter carpentry vise
- Guidance mechanism: steel guide rods
- Additional possibilities: installation of wooden inserts-jaws, cooperation with stops in the worktop

Application:
- Fastening of wooden elements during planing, cutting, drilling, chiseling and gluing.
- Keeping details in a fixed position during finishing and assembly works in carpentry and DIY.
- Service work and minor repairs requiring a secure grip on the worktop.

Benefits:
- Stable and secure fastening without the risk of damaging the material thanks to the possibility of using wooden inserts.
- Faster and repeatable machining thanks to smooth guidance and cooperation with stops in the countertop.
- Saving space on the table top – the jaws flush with the table surface, which makes it easier to work with large formats.

It works well as a 150 mm carpentry vise for the workbench for users looking for a simple and effective solution for everyday tasks.

Instructions for use:
- Assembly:
1) Designate the mounting location under the table top so that the jaws flush with the table surface when attached.
2) Mark and drill the mounting holes in the countertop according to the vise spacing.
3) Screw the vise with the appropriate screws/screws (choose the length according to the thickness of the tabletop), tightening it evenly.
4) If necessary, prepare the wooden jaw inserts and fix them in the retaining holes.
5) Check the smoothness of the feed and the operation of the zapadjustable plate and cooperation with stops in the countertop.

- Use:
1) Place the component between the jaws, position it at the countertop stops if needed.
2) Tighten to get a stable grip; Do not twist the mechanism.
3) When working on delicate surfaces, use wooden inserts.
4) Loosen the jaws when the work is finished; Periodically clean the guides and check the attachment to the countertop.

Hot Tags: carpenter's vise clamp 150mm, China, suppliers, manufacturers, factory, wholesale, buy