PP S1005
S1005 is a medium melt flow rate Polypropylene Homo-polymer resin for high speed extrusion process with the characteristic of excellent process- ability, balanced stiffness/toughness and low water carryover.
Description
Homo-polymer Polypropylene for mono-filament and yarn
Product Description
S1005 is a medium melt flow rate Polypropylene Homo-polymer resin for high speed extrusion process with the characteristic of excellent process- ability, balanced stiffness/toughness and low water carryover.
Typical application: Woven bags,Jumbo bags,Injection moulding etc.
Typical Properties
|
Properties |
Method |
Value |
Unit |
|
Melt Index |
GB/T 3682 |
4.5 ±0.4 |
g/10min |
|
Density |
GB/T 1033.2 |
0.90 |
g/cm3 |
|
Tensile Strength at Yield |
GB/T 1040.2 |
≥33 |
MPa |
|
YI |
HG/T 3862 |
≤5 |
-- |
|
Ash Content |
GB/T 9345.1 |
≤300 |
mg/kg |
|
Tensile Elongation at Break |
GB/T 1040.2 |
≥180 |
% |
|
Tensile Strength at break |
GB/T 1040.2 |
≥15 |
MPa |
Remark: :The values presented on the above are typical laboratory average, not to be construed as specifications and may vary within moderate
ranges. The applicability or the accuracy of this information or the suitable of our products cannot be guaranteed because the conditions of use on the part or our uses are beyond our control.
Product Packaging
Each bag 25kg with PE packaging bag
Storage and transportation requirements
S1005 is a non-dangerous product. The storage period of the product shall not exceed 12 months from the date of production. The means
of transportation shall be kept clean and dry. The products shall be stored in a ventilated, dry, clean warehouse with good fire-fighting facilities, away from heat sources and direct sunlight.
Hot Tags: pp s1005, China, suppliers, manufacturers, factory, wholesale, buy
Send Inquiry
You Might Also Like
