HP500N
The resin is suitable for injection molding, produced by Lyondell Basell Spheripol technology. Propylene is produced by the PDH process, and the sulfur content of propylene is extremely low. The resin has the characteristics of high rigidity, high temperature resistance , medium fluidity, easy processing and so on.
Description
Technical Data Sheet of HP500N Injection Molding Grade PP
|
Item |
Specification |
Unit |
Standard |
|
|
Melt flow rate (230℃,2.16kg) |
8-12 |
g/ 10min |
GB/T 3682.1 |
|
|
Tensile property |
Tensile stress at yield (σy) |
≥32 |
MPa |
GB/T 1040.2 |
|
Nominal tensile strain at break (εtb) |
≥50 |
% |
||
|
Flexural Modulus |
≥1200 |
MPa |
GB/T 9341 |
|
|
Charpy Notched Impact Strength(23℃) |
≥1.0 |
kJ/m2 |
GB/T 1043.1 |
|
Product Description:
The resin is suitable for injection molding, produced by Lyondell Basell Spheripol technology. Propylene is produced by the PDH process, and the sulfur content of propylene is extremely low. The resin has the characteristics of high rigidity, high temperature resistance , medium fluidity, easy processing and so on.
Product Usage:
It is typical used in injection molding, mainly used in the production of daily necessities, electrical appliances, toys and so on.
Product Packaging:
The product is packed with PE composite film, 25KG/bag.
Transportation and Storage:
The transportation facility should be kept clean, dry, and be equipped with carriage or cover cloth. During the transportation, do not mix them with sand, broken metal etc., and toxic, corrosive or flammable materials; it is strictly forbidden to exposure in the sunlight or rain.
Warehouse Storage:
It should be stored in the warehouse which is ventilated, dry and clean, also with good fire-fighting facilities. Keep away from heat sources and avoid direct sunlight. It is strictly forbidden to store in the open air. The storage period is 12 months from the date of production.
Hot Tags: hp500n, China, suppliers, manufacturers, factory, wholesale, buy
Send Inquiry
You Might Also Like
