Brass Combination Lock

Operating Instructions

Unlocking

Keep the original unlocking code is 0-0-0-0.

Set up the unlocking code wheel at the mark line.

Press the open button on the right, and the shackle will pop out and open automatically;

Note: The marking line must be aligned with the center position of the set password, and the code wheel cannot be offset.

Setting a new code

Combination lock needs to set a new password in the open state; There is a setting button at the bottom of the lock body, use the

tool to push the button inside to the end,and at the same time, press the open button on the right side to the end and hold it, at this time release the setting button (the setting button does not pop out, this is right), and then turn the code wheel to align the new password that needs to be set with the mark line;

After the new password is set successfully,you can release the open button. The open button will pop up automatically, and the setting button will also pop up automatically, that is the new

password is set successfully.

Locking

+ Push the shackle back to the original position to the end, at this time you will hear the obvious locking sound, turn the code wheel at will to disrupt the cipher that is locked.

Hot Tags: brass combination lock, China, suppliers, manufacturers, factory, wholesale, buy, Plastic Lever Clamp, Garden Shears, Laser Level Measure, Pocket Spray Bottle, Thread Repair Kit, Steel Bucket