Splitting Wedge Axe 1.0kg Short Shaft

The axe with splitting wedge 1.0 kg, short shaft, by is a compact axe-hammer designed for efficient splitting of firewood, including blocks with a higher density and numerous knots. The forged and hand-sharpened blade head ensures effective fiber cutting, and the integrated, fast-expanding wedge in the butt pushes the material sideways, making it easy to handle splitting without jamming. The short shaft made of hard beech wood improves impact control and manoeuvrability in confined spaces (e.g. with hand splitters, racks, wood winds or tight yards). On one side there is a working blade, on the other – a flat club adapted to be beaten with another hammer or axe, which allows you to increase the power of action with very hard and thick pieces. This combination of functions reduces the need to reach for a separate steel wedge.

In practice, the tool solves common problems in the preparation of fuel: cracking of the block after the fiber, bouncing off hard knots, jamming of the blade in wood with high humidity and low efficiency with a shorter stroke. The head, with a working weight of about 1.0 kg, provides a good compromise between strength and precision, and the total weight of the set makes it easy to deliver the blow stably. is aimed at users looking for a universal tool in the category of "splitting axe with wedge" with a short shaft, suitable for both splitting blocks and making kindling chips.

Safety of use (information paragraph):
The blade is sharp, and the metal parts may become hot during intensive work. It is advisable to use safety glasses, non-slip gloves and toe shoes. A safe distance from other people and animals should be maintained; The work zone should be free of obstacles. Before use, it is worth checking the seat of the head on the handle and the condition of the beech wood (no cracks, looseness, moisture). Beatings of the batter are permissible only with a flat hammer; Do not use tools with a damaged impact surface. Do not strike the stone ground or metal components. After work, secure the blade and store in a dry place.

Features:
- Forged and hand-sharpened head: ensures clean groove in the jar, making it easy to initiate splitting even in hardwood and damp wood.
- Fast-expanding wedge in the butt: increases expansion force, reduces jamming, improves efficiency in knotted blocks.
- Beat function: the flat baton allows you to hammer when you need to go deeper into the material.
- Short beech shaft: better control, shorter swing, suitability for working in confined spaces and for precise splitting into smaller splits.
- Universal use: from preparing a kindling to splitting medium and some thick blocks without having to reach for separate wedges.
- Balanced for technical work: The working weight of 1.0 kg supports users who prefer more frequent, controlled strikes instead of a very heavy swing.
- Hammer-type design: combine blade and blunt in one tool to save time and space in your tool set.

Parameters:
- Unit of measurement: pcs
- Product weight: 1,386 kg
- Weight of the working part (head): 1000 g
- Blade material: forged steel, hand-sharpened
- Handle material: beech wood, short shaft
- Tool type: axe-splitting hammer with expansion wedge
- Possibility of beating the club: yes
- Purpose: splitting and splitting firewood

Application:
- Splitting firewood blocks in the household, on the plot, in forestry and in cleaning work when storing wood.
- Preparation of kindling and logs with a smaller cross-section for stoves, fireplaces and outdoor hearths.
- Pre-notch and expansion of knotted blocks; the ability to finish the hammer with an extremely hard material.
- Working in a confined space thanks to a short shaft where a long swing would be difficult or dangerous.
- Complement your manual log splitter or woodworking tool kit when you need mobility and speed without power.

The compact axe-hammer with 1.0 kg wedge combines splitting performance with impact control. The short beech shaft and the forged head with an expanding wedge make the tool suitable for a variety of woods, even with difficult knots. A solution designed for users who focus on confident entry into the material and the ability to beat with demanding blocks.

Instructions for use:
1) Pre-check: check the seat of the head on the handle, no cracks in the wood, the sharpness of the blade and the clean, flat surface of the club. Wear glasses, gloves and sturdy shoes. Prepare a stable, wooden substrate or stump.
2) Material setting: place the block vertically on the stump, locate natural cracks/jar or knots, plan the direction of splitting.
3) Pre-cutting: strike the blade at the desired point in a controlled swing adapted to the weight of the tool. For kindling, you canstart from the edge.
4) Splitting: when the blade enters the material, continue hitting or use beating – hit the club with a flat hammer to deepen the wedging and push the wood apart.
5) Removing the tool: in case of a jam, move the toolslightly to the sides, or beat the stick until the block releases. Do not twist aggressively to the sides so as not to damage the handle.
6) Maintenance after work: clean and dry the tool, put the guard on the blade, oil the handle periodically. Store in a dry place.

Benefits of use:
- Higher splitting efficiency due to the rapidly expanding wedge in the club.
- Better control and manoeuvrability thanks to the short beech shaft.
- The ability to beat the club reduces the need for separate steel wedges.
- Time savings in the preparation of firewood and kindling.
- Versatility for use in the home, garden and field work without power.
- Stable balance promotes prrepetitive strokes.
- Compact tool easy to transport and store.

Hot Tags: splitting wedge axe 1.0kg short shaft, China, suppliers, manufacturers, factory, wholesale, buy