Tips For Using And Maintaining Safety Padlocks

1. The transmission part of the lock body of the lock should always be kept with lubricant, so that the safety padlock can maintain smooth transmission and prolong the service life of the lock. Therefore, it is necessary to check the use of the locks regularly. It is generally required to check every six months, especially whether the fastening screws are loose. If there is looseness, they should be tightened in time.

2. After the lock has been used for a period of time, even if there is no astringency or sluggishness, the lock cylinder should be maintained regularly for half a year, usually by adding pencil fragments or graphite powder to the lock cylinder slot, and inserting more keys Forward it several times so that the keys can be inserted and removed smoothly. But no oil can be added to avoid the grease sticking the marbles and making it difficult to unlock.

3. When installing, check the relevant manual carefully, and install it in accordance with the requirements of the manual, especially to recognize the installation center distance, the scope of application and the opening method.

Fourth, always pay attention to keeping the lock body clean, and be sure to prevent foreign objects from entering the marble groove of the lock cylinder, causing it to start unsmoothly or fail to open. If you encounter problems opening with the key, you can add kerosene, gasoline or rust-proof lubricant to the lock cylinder, and then insert the key and turn it repeatedly.