8 Points Of Ladder Job Safety Requirements

1. Up and down the ladder, should face the ladder, maintain three contact, not to carry bulky tools and materials, the ladder should be selected to meet the load-bearing requirements, appropriate length, convenient operation.

2. Ladder placement slope should be appropriate, the horizontal distance between the contact point at the upper end of the ladder and the lower end support point should be equal to one quarter to one third of the distance between the contact point and the support point.

3. do not tilt the body remote operation, excessive extension of limbs to carry out construction operations, will cause the body imbalance leading to fall. Do not pedal ladders, do not use legs, feet to move ladders.

4. Do not sit on the ladder operation, the use of the human character ladder, buckle should be fastened.When working with electricity or near running equipment, choose insulated ladders, ladder stools, and do not use metal ladders.

5. ladder should be placed smooth and reliable, the foundation and the support should be stable, and can withstand the maximum load on the ladder, the ground should be flat, no debris, not wet.

6. When you working on a ladder you should wearing non-slip shoes, not two or more people working on the same ladder or up and down.

7. When using a straight ladder, stand on a ladder not less than 1 m from the top of the ladder, when the ladder is attached to the lifting line, the upper end of the ladder is at least 30cm higher than the lifting line (except for the upper end of the ladder with a hook), but the higher part shall not exceed one-third of the height of the ladder.

8 Before using the ladder should confirm that the ladder is intact, ladder accessories should be complete, the connection should be strong, ladders and pedals without skew, break, relaxation, rupture, decay, distortion and other defects. Folding ladders and telescopic ladders should be free to move. The rope of the telescopic ladder should be free of breakage and breakage, the metal ladder pedal should be anti-slip treatment, the foot of the ladder should be equipped with anti-slip insulation ladder anti-slip insulated rubber mat.