How to install door and window hardware accessories

1. Installation of the handle

The handle installation should be ergonomic and easy to use. All the handles of the same wardrobe must be neat and consistent during installation. The length of all screws should match the thickness of the cabinet door and drawer surface. When opening a hole with an electric drill, the hole size should be the same as the screw diameter.

2. Installation of door hinge

Generally, two hinges with a length of 100mm are installed on the door. If it is a solid door or a concave-convex shaped door, three hinges must be used, or two hinges with a length of 125mm must be installed.

Three, the installation of the lock

After the door lock is installed, the distance between its handle and the ground should be between 900-1000mm. When installing, install the lock body and lock tongue first, make the lock tongue plate flush with the door edge, close the door tightly, fix the position of the lock plate, and then install the lock plate, and make sure that the lock plate is flush with the door edge.