Introduction To The Classification And Production Process Of Luggage Hardware Accessories
Leave a message
Material: Luggage hardware can be divided into iron, copper, aluminum, zinc alloy and other die-casting hardware according to the material.
Appearance: According to specific product categories, luggage hardware is divided into tie rods, small wheels, mushroom nails, ram nails, foot nails, hollow nails, sliders, corns, D buckles, dog buckles, pin throughs, belt buckles, chains, coils, Locks, magnetic buttons, various trademarks and decorative hardware, etc. All kinds of hardware are divided into different functions or shapes. And various hardware accessories also have many specifications.
Color: The luggage hardware has many colors according to electroplating: white, gold, gun black, green bronze, green ancient brush, chrome and so on. There are also many points to pay attention to in electroplating. Different electroplating colors have different requirements for the process. The exporter should pay attention to whether it meets environmental protection and non-toxic requirements.
Domestic geographic pattern:
Domestic luggage and leather goods are sold by terminals in the leather goods market in Guihuagang, Guangzhou, the Baigou luggage market in Hebei and other specialized markets with a high degree of industry concentration, as well as the Yiwu Small Commodity City in Zhejiang, the Hehuachi in Chengdu, and the Liaoning Nantai luggage market. Judging from the current development situation, Shiling is the leather capital of China, and Baigou, Hebei is the luggage capital of China. The two places have the highest industry concentration. Large-scale procurement of luggage hardware and accessories includes Shiling International Leather City, Huadu District, Guangzhou, Guangzhou Zhongda Textile City, Haining China Leather City, and Baigou Accessories City. Guangzhou has a leading leather and hardware market in Guangyuan West Road and Shiling in the urban area, which are larger but belong to new production projects, and their popularity still needs to be improved.
Production process:
1. The first step: the new product is produced by the manufacturer. The first condition is that the manufacturer knows how to make the mold. The production of the mold is very important, because it is impossible to determine whether the product can be made without understanding the production of the mold.
2. The second step: die casting products. Put the finished mold on the die casting machine for die casting. Die-casting machines are divided into tonnages. Ordinary luggage hardware accessories generally use 25-ton die-casting machines. It is also very skillful to use die-casting machines to make products. This depends on the skill of the master of the press. It is necessary to control the pressure. If the pressure is too high, the product will have a lot of burrs and consume electricity. If the pressure is too low, the surface of the product will appear pits, not smooth and uneven, so the press master must control the machine to make a good product! After typing it out, you must break the material.
3. The third step: polishing. This is the most important link in the production process of luggage hardware accessories. Just like women’s jewelry, it is shiny and smooth because it is highly polished and then electroplated to produce such a shiny effect. In fact, luggage hardware accessories In this line, Belden has the same manufacturing process as jewelry and other hardware products, so to make the product shine is to do a good job of polishing.
4. The fourth step: the upper foot piece. Because you want to fix the product on the bag, you need to install the iron wire foot piece. The iron wire is fixed on the foot piece by die-casting. In the past, it was pressed by a three-ton punch. Now it is pressed and fixed by a machine bench drill. Live, now I use bench drilling rigs, technology has improved, and the production tools have also been changed! Another link is that some of them are screwed, so we need to tap the screw holes. Here we use the tapping machine.
5. The fifth step is to apply color plating to the product. The electroplating depends on the technique of the electroplating master. First, the impurities in the product area should be cleaned with sulfuric acid, and then the product will be primed. The last time the bronzer is the primer, the thicker the primer, the better, and then put it in the plating tank for electroplating. The electroplating time should not be too long or too short. After the electroplating is completed, each product will be taken off the shelf, and finally packaged and sent to the customer.







